Mold Base

<< Click to Display Table of Contents >>

Navigation:  Getting Started > Defining Injection Molding Components in SYNC >

Mold Base

This section demonstrates how to set up a mold base and the relating parameters.



Double click clip0134 in the tree menu and the Moldbase Setting window will pop up.


Determine the mold base center.

There are two ways of setting the mold base center:

1.Enter coordinates: Click Select Point then select a datum point.

2.Select a datum point: Click Select Point then select a datum point as mold base center.


Select different mold base center as shown on the left.



Mold Base Dimension

Determine the mold base size.


Material Setting

Click Set Material to activate Moldex3D Material Wizard.

Select the desired material from the pull down list and click OK; users are able to choose from metals.

1.By clicking on clip0006, users can access to the complete Moldex3D Material Bank.

2.Click OK to confirm your settings.

Two entities: Parting direction and moldbase will appear in the tree menu upon completion of set-up.

Double click MOLDBASE to modify any previous settings, or use the “delete” button on the keyboard to delete.

Double click clip0139 to set up parting direction, the default setting is Z-Axis.